Go Shower Dog Traveling Shower Grass Green by Kurgo

(No reviews yet) Write a Review
Calculated at Checkout
Adding to cart… The item has been added

Product Description


Go Shower

Sometimes your dog gets some mud on him. Other times it’s more like a dog got mixed in with a mud puddle.

The Go Shower says what it is: a serious shower for when you’re on the go, and your dog is seriously dirty. Its 6-liter capacity means over two minutes of scrub time, and its adjustable strap makes it easy to hang the bag from your car door, a tree limb, or whatever’s handy.
Packs small, carries light, and keeps it clean.

by Kurgo
UPC: 813146019146


  • Bladder capacity: 6L / 1.59 gallons.
  • Shower lasts a little over 2 minutes with non-stop stream.
  • Pull showerhead nozzle out to use, push in to stop.
  • Rolls up for storage.
  • Pockets for storing cleaning essentials.
  • Webbing loops to attach towel.
  • Allows you to use both hands to scrub dog.
  • Bottle opener.
  • Bladder can be removed and set in the sun for heating.
  • Bladder is PVC and therefore should never be used to provide drinking water for your dog.
  • Remove bladder and tube. Machine wash gentle or hand wash. Air dry.
  • California Prop 65 Warning

To fill, open the screw cap on the front of the bag and fill the bladder with water.

If you plan to heat the water, you will need to remove the bladder from the bag prior to filling it. Once filled, you can lay the filled bladder down in the sun or hang it. Always remember to test the water temperature prior to using it on your pup.

Hang shower bag where desired using the strap or handle at the top of the bag. Make sure that the bag is hung high enough so that the hose is angled downward. This will ensure proper water flow.

To release the water, pull the grey showerhead outward. To stop the water push the grey showerhead inward.

To store, secure the hose with the hook and loop tab on the side of the bag, making sure that the showerhead is facing up.

To dry the bladder, open the screw cap on the front and hang to dry. The hose can also be removed to speed drying.

If your hose is bent, place flat in a warm area before first use.

Cleaning Instructions

The first time you use your Go Shower, you may notice that the water bladder has a slight odor to it. This is normal and of no concern, however, you may opt to clean it first. To do so, remove the bladder from the bag.

Fill the bladder half full with water, add a small amount of mild dish detergent and screw the cap shut. Shake back and forth several times and then drain the water.

Continue to fill and rinse the bag with clean water until the water comes out clear.

To dry the bladder, open the screw cap on the front and hang to dry. The hose can also be removed to speed drying.


The Go Shower should NOT be used for drinking water.

Lifetime Guarantee

Kurgo prides itself on making superior quality products. There’s nothing more frustrating than buying a product that breaks. If during your product’s lifetime, it does not function as it should due to a manufacturing defect, Kurgo will repair or replace your product free of charge. Hassle and worry-free!

Related Products